Product Description; Part List; Using The Product - Qilive Q.6117 Manual Del Usuario

3. PACKAGE CONTENTS
FR
EN
1 x Oil-free heater
2 x Foot plates with 4 castors attached
1 x User manual

4. PRODUCT DESCRIPTION

4.1

Part list

1. LED display
2. MODE knob
3. ECO mode button
4. Power button
5. Castor
6. Foot plate
7. Handle

5. USING THE PRODUCT

5.1 Assembly instructions
WARNING: The heater must only be operated with the castors fitted and in an upright
position.
Unbox the heater, being careful to remove all parts from plastic bags and remaining
packaging. Please save the carton for off-season storage.
This heater is packed with 4 castors that are pre-assembled on 2 separate foot plates in
the box. To install the foot plates onto the heater, follow the steps and diagrams below:
1. Turn the heater upside down on a carpet or another soft surface to avoid damage.
2. Install the 2 foot plates onto the bottom at both ends of the heater housing. Line up
holes of the foot plates with holes on the bottom of the heater housing at both ends,
and secure the foot plates using the 4 provided screws.
3. Return the heater to the correct orientation so it rests on the castors.
5.2 Positioning the heater
This heater is intended for use only on the floor.
• Always place the heater on a flat and stable surface. Damage may occur if it is
placed on a slope.
• This heater radiates heat in all directions, so always leave ample space around it.
8