KALLISTA P23083-CR Instrucciones De Instalación página 5

INSTALLATION INSTRUCTIONS
‰ Ensure the valve stem adapter is firmly pressed onto the valve stem.
‰ Secure the valve stem adapter to the valve with the correct length screw, as selected in the "Install the
Valve Stem Adapter" section of this guide.
‰ Align the holes on the front plate assembly and the valve.
NOTE: Be sure to select the correct length screw for your application.
‰ Attach the two screws through the front plate assembly and into the valve. Do not overtighten.
‰ Visually inspect the front plate assembly to ensure the foam seal is completely covering the wall opening. If
not, stop the installation and repair the wall opening.
1491054-2-A
5 of 16
3. INSTALL THE FRONT PLATE
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
3-way Transfer Valve Trim
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.