Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN Operating instructions
8.3 Tilt monitoring
The Primus 2 H1N+ includes tilt monitoring, i.e. the actual tilt of the laser
plane is continuously compared with the specified value (see 8.1). If neces-
sary, the tilt is readjusted, so that the actual tilt is always the same as the spe-
cified tilt. The readjustment is made within the scope of the given tolerance
(see 3.2)
9
Maintenance/Care
9.1
Maintenance
The PRIMUS 2 H1N+ are maintenance free units. If the PRIMUS 2 H1N+ lon-
ger function due to an internal error (error messages Err9-Err11) or damage,
send them for repair to:
NEDO GmbH & Co. KG
Service-Abteilung
Hochgerichtstraße 39 – 43
72280 Dornstetten / Germany
9.2
Care
The laser diode of the rotating laser is protected by glass covers. Use a soft
cloth to regularly clean the glass covers and ensure correct operation. Avoid
scratches in the glass covers. Use standard cleaning agents to clean the dust-
proof and watertight, partly rubberised housing. Use plenty of water to
remove heavy soiling.
CAUTION!
Do not immerse PRIMUS 2 H1N+ in water.
33
Publicidad
Tabla de contenido
