Milwaukee 2528-20 Manual Del Operador página 6

To reduce the risk of personal in-
WARNING
jury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to flow inside them. Do not use
bleach as a cleaning agent.
Cleaning
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
Draining and Cleaning the Tank,
Hose, and Spray Wand
If there is any liquid left in the tank after spraying,
the tank should be drained before cleaning. Do not
store chemicals in the tank. Tank must be cleaned
before using another liquid. Do not mix liquids. Follow
the chemical manufacturer's instructions for proper
cleaning, storage and/or disposal of excess liquid.
To Drain:
1. Remove battery pack.
2. Remove the powered head from tank.
3. Empty the tank into a suitable container through
the fill area. WARNING! Always wear personal
protective equipment (PPE) according to the
chemical manufacturer's instructions. Always wear
eye protection.
To Clean:
1. Remove battery pack.
2. Remove the powered head from tank and set
on a level surface away from the tank to prevent
exposing the powered head to harsh chemicals.
3. Fill the tank about one-third full with clean water.
Replace the cap and gently slosh the water around
the tank.
4. Install the tank and spray the water until the tank
has been emptied. Make sure to direct the spray
toward an area that will not be damaged by residue
chemicals in the tank.
5. Repeat the procedure with clean water until the
tank is thoroughly clean. Wash outside of nozzles
and dry with cloth.
6. Wipe the outside of the tank with a clean, dry cloth.
7. Allow all pieces to completely dry before reinstall-
ing parts and storing the sprayer. Always reinsert
strainer before replacing tank cap.
Protect from freezing, store indoors. Store spray
wand securely in wand storage pocket. Store the
sprayer in a secure, well-ventilated indoor space
with the tank empty.
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
ACCESSORIES
Use only recommended accesso-
WARNING
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
www.milwaukeetool.com
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
6
Storage
Repairs
(1.800.729.3878)