Manual Time Setting And Other User Defined Settings; Alarm Settings - Bresser Tendence FSX Manual De Instrucciones

10 Manual time setting and other user defined
settings
1.
2.
3.
4.
5.
6.
7.
8.

11 Alarm settings

1.
2.
3.
4.
12 / 100
Press the SNOOZE/LIGHT button for about 8 seconds to
deactivate the automatic time setting. The reception
symbol for the radio-controlled watch disappears from
the display.
In normal display mode, press the TIME button for
about 2 seconds to enter the settings mode.
Digits to be set are flashing.
Press CH/UP or 12/24/DOWN button to change the
value.
Press the TIME button to confirm and switch to the next
setting.
Sequence of the settings: Year > Change day/month
display > Month > Day > Daylight saving time (DST)
AUTO/OFF (off) > Hours > Minutes > Seconds > Lan-
guage > Time zone (-23 to +23 hours)
Finally press the TIME button to save the settings and
exit the settings mode.
NOTICE! To restore the automatic time setting, press
the SNOOZE/LIGHT button again for 8 seconds. The re-
ception symbol for the radio-controlled watch re-
appears in the display.
In normal display mode, press the TIME button several
times to display the Alarm time AL1 or AL2.
Press ALARM button for approx. 3 seconds to enter the
alarm time setting mode.
Digits to be set are flashing.
Press CH/UP or 12/24/DOWN button to change the
value.