Cleaning The Spring Guide; Storage; Optional Accessories; Exploded View And Spare Parts List - Mafell Guiding device L Instrucciones De Funcionamiento Y Seguridad

5.4 Cleaning the spring guide

Use the following procedure to clean the spring
guide:
1. Pull the black plastic spring guide in cutting
direction.
2. Remove any wood chips from groove and guide
fence. For this purpose, use a suction device of
the HEPA class.
The spring guide is cleaned.
✓

5.5 Storage

Clean the machine thoroughly if it is not used for a longer period of time. Spray bare metal parts with a rust
inhibitor.
6

Optional accessories

- Chip breaker guard plastic section for guiding device S
- Chip breaker guard kit F-SS 3.4 m for guiding device M/ML/L
- Adhesive section F-HP 6.8 m for guiding device M/ML/L
7

Exploded view and spare parts list

The corresponding information on the spare parts can be found on our homepage: www.mafell.com
16
Fig. 17: Cleaning the spring guide
Guiding device L/M/ML/S
Order no. 204371
Order no. 204375
Order no. 204376
06/2021