Overheat Protection - HOMCOM 820-317V90 Manual De Instrucciones

OVERHEAT PROTECTION

This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheat,e.g. due to the total or partial obstruction of the
grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and
remove the object which is obstructing the grids. Then switch it back on as decribed
above. The appliance should operate normally. Should the problem persist, please
contact the nearest customer service.
NOTE: To assist in maintaining the internal components, after pressing the +++
button the fan
will continue to blow room air for a period of 30-60 seconds before shutting down to
standby.
Battery
The remote control use one button cells, model No. CR2025 (3V). We recommend
the use of Lithium type battery for longer use.
Note: Please follow battery disposal instruction on battery packaging, or contact
your local councils for safely disposal of batteries.
4