FONESTAR ZS-2000M Manual De Instrucciones página 9

INSTALLING THE ZS-2000M AND ZS-1500/ ZS-2250/ ZS-4125 IN THE APPLIANCE CABINET
Install the ZS-2000M and ZS-1500/ ZS-2250/ ZS-4125 into the associated appliance cabinet. This process
is described in the following steps:
1. Connect and hang the PTT microphone in place on the front panel of the ZS-2000M. An installed PTT
microphone is shown in Figure 10.
2. Install brackets on the left and right sides of the ZS-2000M, as shown in Figure 11.
Figure 11 Schematic Diagram of the ZS-2000M Bracket Installation
3. Put the ZS-2000M appliance into the cabinet, and tighten the screws to secure the unit, as shown in
Figure 12.
Figure 9 Schematic Diagram of Cabinet Grounding
Figure 10 PTT Microphone Installation Diagram
- 9 -
EN