Product Maintenance - Redroad G10 Manual De Instrucciones

Operation
Reset Wi-Fi
When your router or Wi-Fi access password has been changed, you
have to reset your Wi-Fi connection by pressing and holding both "
and " " for 7 seconds when this product is power-on, and Wi-Fi
connection is reset successfully when a voice prompt "Wi-Fi reset and
network configuration activated" is given.
Note: Only Wi-Fi network in 2.4GHz frequency is available to this
product.
Reset/recover system
Press the reset button for 3s with a needle, and when you hear
"successfully reset the system", the main machine will restart
automatically, and relevant settings such as scheduled cleaning and
Wi-Fi will be recovered to the factory state.
Press the reset button for 10s with a needle, and when you hear
"successfully recover the system", the main machine will restart
automatically, and the relevant settings such as scheduled cleaning
and Wi-Fi will be recovered to the factory state, and the system will be
recovered to the previous firmware version.
Note: After resetting/recovering the system, the main machine needs to
reconnect the App, and the relevant settings in the App are cleared.

Product Maintenance

Dust compartment
1. Open the vacuum-mop cover, press the dust compartment
"
release button, and take out the dust compartment.
2. Open the dust compartment cover as shown in the figure, and
dump the garbage.
12
Dust compartment
release button