Redroad G10 Manual De Instrucciones página 18

Product Maintenance
Sensor
Please use soft dry cloth to clean cliff sensor and edge IR sensor
regularly.
Edge IR sensor
Note: Do not use chemicals such as detergent or spray to clean the sensor.
Cliff sensor
Instructions for Use of Micro-power
Equipment
1. The RF 433MHz technology used in this product meets the technical
requirements of universal wireless remote control equipment in the
"catalogue and technical requirements of micro-power short-range radio
transmitting equipment", and is used for data transmission applications.
Please refer to the related contents in the instruction manual for
external PCB antenna, control, adjustment and switch, etc.
2. It is not allowed to change the use scene or conditions, expand the
transmission frequency range and increase the transmission power
(including additional RF power amplifier), and it is not allowed to
change the transmission antenna without authorization.
3. It is not allowed to generate harmful interference to other legitimate
radios (stations) or propose protection against harmful interference.
4. It shall bear the interference of industrial, scientific and medical (ISM)
application equipment that radiates RF energy or other legitimate radios
(stations).
5. If there is harmful interference to other legitimate radios (stations), it is
needed to immediately stop using it and take measures to eliminate the
interference before continuing to use.
6. The use of micro-power equipment in aircraft and electromagnetic
environment protection areas such as radio observatories, weather radar
stations, satellite earth stations (including observation and control, ranging,
receiving and navigation stations) and other civil radios (stations) and
airports designed according to laws and regulations, relevant state
regulations and standards shall comply with the regulations of
electromagnetic environment protection and relevant industry authorities.
7. It is forbidden to use all kinds of model remote controllers in the area with
the center of the airport runway as the center and a radius of 5000m.
8. The working temperature of micro-power equipment in use is 0℃ to 35℃,
and the rated working voltage of sweeping and mopping robot is 14.4V; the
working voltage of self-cleaning station is 100-240V.
15