Frequently Asked Questions/ Troubleshooting - VITO PRO-POWER VIBCRBSFL20 Manual De Instrucciones

FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING

Question/Problem - Cause
Cause
The angle grinder does not start when you press the
ON/OFF switch:
• The battery is discharged;
• ON/OFF contacts are not in good condition or it
does not work;
The motor makes an abnormal sound, starts
intermittently or runs slowly:
• ON/OFF switch contacts are damaged;
• Mechanical parts are blocked/clogged;
• The angle grinder is running over excessive
pressure, overloaded motor;
The accessories vibrate excessively during operation:
• The outer flange is not tightened correctly;
Angle grinder overheats:
• Overloaded appliance;
• Poor assembly of the housing or pieces inside the
angle grinder;
32
Solution
• Charge it;
• Repair or replace the switch;
• Repair or replace the switch;
• Inspect the mechanical parts;
• Reduce the pressure applied;
• Tighten;
• Reduce the pressure applied;
• Check if there is any blockage or part touching the
spindle;