Adjusting The Time - VDO MTCO 1324 Instrucciones De Servicio

Adjusting the time

• The function TIME ADJUSTMENT may
only be selected if the vehicle is sta-
tionary.
• For an automatic synchronisation of the
chart carrier and the time, the ignition
has to be switched on and there must
not be any chart inserted in the
MTCO 1324.
1. Select the TIME ADJUSTMENT via
2. Activate the minutes counter via
the minutes start to flash.
3. Depress or
value is being displayed.
4. Activate the hours counter via
start to flash.
5. Depress or
value is being displayed.
When exceeding or undershooting 12 p.m.,
the date will be adjusted automatically.
6. Acknowledge the time adjustment by
depressing the
seconds. The basic display will then be shown
again.
Comment
If you adjust the time while a chart is inserted, the
error symbol will be shown in the display and the
time will be flashing. The MTCO 1324 will remind
you to update the chart carrier settings;
see page 34.
© Continental Automotive GmbH
or
key until the desired
, the hours
key until the desired
key for more than 2
= Depress key shortly
= Depress key for a longer interval
.
,
31