universalblue UVT1300-20 Manual De Instrucciones página 34

arranged as shown below (3) or in a triangular shape in the
centre of the fan frame.
Place the bulb holder structure (C) matching the holes in the
lamp structure (B) and return the screws to their original
position.
Make the electrical connection between the lamp structure (B)
and the bulb holder structure (C). To do it, connect the terminal
cables according to their colour, connecting the terminal cables
of the same colour to each other through the strip (blue wire with
blue wire; white wire with white wire). It will be necessary to
loosen slightly the screws of the terminal strip to adjust them
again once the cables have been inserted.
34