EAS ELECTRIC EMCH R32 Serie Manual De Instrucciones página 108

The unit will run according to the figure below:
6.3.2 WEEKLY SCHEDULE (Take ONE ZONE as an example)
The WEEKLY SCHEDULE function is used to set different operation
mode and temperature within one week (One day or more).
If "WEEKLY SCHEDULE" and "TIMER" are both set, and "TIMER" is set
later than "WEEKLY SCHEDULE", then the "TIMER" setting is valid
and the "WEEKLY SCHEDULE" is invalid.
If WEEKLY SCHEDULE is activated,
Go to " "> ''SCHEDULE" > "WEEKLY SCHEDULE". Press ''
following page will appear:
SCHEDULE
WEEKLY SCHEDULE
TIMER
SCHEDULE CHECK
MON. TUE. WED. THU. FRI. SAT. SUN.
ENTER CANCEL
MON SELECT
is displayed on home page.
7
CANCEL
TIMER
41
'', the
V.1