EAS ELECTRIC EMCH R32 Serie Manual De Instrucciones página 87

If COOL(HEAT) mode is set to NON, only one mode can be selected
on the controller interface, the following page will appear:
OPERATION MODE
Operation mode can only be
set heat mode:
HEAT
CONFIRM
The operation mode can also be switched by the room thermostat.
When "ROOM THERMOSTAT" is set "MODE SET" in "FOR
SERVICEMAN", the following page will appear if you want to select
other operation modes:
Cool/heat mode is controlled by
the room thermostat.
Please adjust the operation
mode by the room thermostat.
CONFIRM
20
OPERATION MODE
Operation mode can only be
set cool mode:
COOL
CONFIRM
V.1