Operation - EAS ELECTRIC EMCH R32 Serie Manual De Instrucciones

Press '' '' again, "MON" is selected as shown below. It means
Monday has been selected.
Then use " ▼ " to move cursor to "ENTER", press "
mode and temperature of Monday can be set.
The following page will appear:
The parameter setting method is the same as that of "TIMER".
(Please refer to 6.3.1 TIMER)
The parameter setting method for other days of one week is the
same. The setting method of WEEKLY SCHEDULE for DOUB LE
ZONE is the same as ONE ZONE. (To know how to switch from
ZONE1 to ZONE2, please refer to 6.3.1 TIMER)
SCHEDULE
WEEKLY SCHEDULE
TIMER
SCHEDULE CHECK
MON. TUE. WED. THU. FRI. SAT. SUN.
ENTER CANCEL
MON SELECT
SCHEDULE
WEEKLY SCHEDULE
TIMER
SCHEDULE CHECK
NO. START END MODE
1 00:00 00:00 HEAT
2 00:00 00:00 HEAT
3 00:00 00:00 HEAT
42
CANCEL
TIMER

", operation

1/2
CANCEL
TIMER
TEMP
0℃
0℃
0℃
V.1