Hidden Cam - Sauder 416091 Manual De Instrucciones

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push thirty HIDDEN CAMS (1F) into the ENDS (A and B),
å
UPRIGHTS (C and D), LARGE UPRIGHTS (E), TOP (F2),
BOTTOM (G2), and SHELF (H2). Then, insert the metal
end of a CAM DOWEL (2F) into each HIDDEN CAM
except in the ENDS (A and B) and LARGE UPRIGHTS (E).
Do not tighten the HIDDEN
CAMS in this step.
2F
(16 used)
(30 used)
Do not insert CAM DOWELS into these parts.
B
Arrow
www.sauder.com/services
Arrow
1F
A
1F
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1625
to watch a video on how to assemble your unit.
F2
H2
C
D
E
E
416091
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
G2
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
1F
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Arrow
Page 5