Hidden Cam - Sauder Palladia 411836 Instrucciones De Montaje

15 15
P
BLACK 9/16" LARGE HEAD SCREW
(4 used for the DRAWER BOTTOM BRACKETS)
Slide the SMALL DRAWER BACK (O) into the grooves in the SMALL DRAWER SIDES (P).
Flip the drawer over and fasten the DRAWER BRACE (F) to the SMALL DRAWER FRONT (L). Tighten the HIDDEN CAM.
Insert the DRAWER BOTTOM BRACKET (HH) into the groove in the SMALL DRAWER BACK (O) and wrap it over the DRAWER
BRACE (F). Fasten the BRACKET (HH) to the DRAWER BRACE (F). Use a BLACK 9/16" LARGE HEAD SCREW (VV).
Insert four CLIPS (KK) into the groove in the SMALL DRAWER BACK (O) and wrap them over the DRAWER BOTTOM (K). Tap
a NAIL (YY) through each CLIP.
NOTE: The CLIPS should set in about 1" from the SMALL DRAWER SIDES.
Repeat this step for the other drawers.
Page 20
P
O
(16 used)
VV
HH
www.sauder.com/services
Slide the DRAWER
BACK down.
Groove
KK
Surface with

HIDDEN CAM

F
O
(4 used)
YY
NAIL
(16 used for the CLIPS)
K
411836
L