Samsung SCC-C4253P Manual Del Usuario página 27

All manuals and user guides at all-guides.com
setup
DAy/NIGHT
You can specify a recording mode according
to the scene.
Select <CAmERA SET> - <DAy/NIGHT>.
1.
2. Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of

the scene.
NIGHT : Fixed to NIGHT mode,

regardless of the scene.
If BURST is set to <ON>, the burst signal will be output along with the black-
and-white composite video signal.
AUTO : According to the luminance, this

will switch DAY to NIGHT mode, or vice
versa.
- BURST : If set to <OFF>, the burst
signal will not be output in NIGHT mode.
- DAY  NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW filter.
Adjusting from HIGH to LOW will cause
to switch the filter in a darker screen.
- DAY  NIGHT DWELL TIME : Time
required to determine the filter switch.
- NIGHT  DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the
filter in a darker screen.
- NIGHT  DAY DWELL TIME : Time required to determine the filter switch.
- MASK AREA : If there exists a bright
spot light source in a night scene, you
can specify the size and position as
needed.
This will prevent an error in switching
filter, or failure to determine the filter
switch in a night scene where a bright
spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
You can specify MASK 1 and 2 simultaneously.
_ setup
DAY/NIGHT
WHITE BAL
FOCUS MODE
ZOOM SPEED
DISPLAY ZOOM
DIGITAL ZOOM
DETAIL
V-SYNC
AGC COLOR SUP
AUTO
BURST
DAY NIGHT

BRIGHTNESS
DWELL TIME
NIGHT DAY

BRIGHTNESS
DWELL TIME
MASK AREA
MASK AREA
<SIZE>
<LOCATION>
AUTO
ONEAF
[ 2 ]
OFF
OFF
[ 2 ]
(INT)---
MID
OFF
MID
2SEC
MID
5SEC
1 2