Using An Optional Headset - Kenwood UBZ-LJ9SETE Manual De Instrucciones

2.6 Using an optional headset

You can connect headsets with a Kenwood
double jack (2.5 / 3.5 mm) to this transceiver. For
information on compatible accessories, see the
KENWOOD website.
• Slightly lift the plastic tab of the cover at the
top and carefully turn it clockwise 90 degrees
backwards.
• Insert the plugs completely into the jack
sockets. If the jack plug is not inserted correctly,
contact errors can occur and cause noise. If the
headset is equipped with a PTT key, this can be
used accordingly.
Attention!
To prevent hearing damage, please reduce the
volume of the transceiver before using a headset.
9