Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Closing the gate:
1. Turn the knob counterclockwise
and pull it up at the same time
to unlock the gate(5a). You will
see the red indicator meaning
the gate is now unlocked.
2. Grasp and pull the vertical rod to
stretch the mesh gate
across the opening. Align
with the upper and lower
latch brackets (5b).
3. Insert the bottom of the pole into
the lower latch bracket first. Pressing
the release button of handle,
slide locking latch downward and
secure it into the upper latch
bracket (5c). The green indicator
will then appear in the latch
bracket window.
4. To lock the gate, press the swivel latch down until it clicks into place and the red indicator is no longer
visible on the mounting bracket side. (5d)
NOTE: After closing the retractable gate, always check that the gate is locked by pushing gently against
the mesh part. After placing the gate on the wall brackets, the bottom of the gate should be flat to the floor.
Opening the gate:
Depress the release button on the handle and slide downward until it clears the upper latching bracket and lift
to remove from lower latching bracket.
If you would like to fully retract the gate, unlock swivel latch by turning counterclockwise and pulling up at the
same time. The red indicator will be visible meaning the gate is now unlocked and will automatically retract.
Removing the gate:
With the gate retracted, press firmly on the side button (6a) of the upper
mounting bracket and lift the gate up and away to remove.
CARE
CLEANING: Clean the gate and mesh part with a damp cloth or sponge using warm water and a mild detergent.
Never use solvents or chemicals to clean the gate and/or mesh part.
5a
1
Turn
5c
Press
1
Slide
2
down
Distributed exclusively in
the United States by
North States Industries, Inc.
5455 Highway 169 N
Plymouth, MN 55442
www.northstatesind.com
Manufactured in China
5b
2
Pull
5d
Press to Lock
6a
Page 4
Swivel latch
Publicidad
