Preparations For Use - Infiniton FGC-79WS Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

temperature of each compartment and the working parameters can be managed and set.
★Inverter technology
Integrated with precise frequency conversion, noise reduction, energy saving, precise temperature control and other
technologies, the fridge-freezer boasts of superior performances. Furthermore, working efficiency of the inverter
compressor can be automatically adjusted according to the ambient temperature and the set temperature, so as to keep
the fridge-freezer operating in its optimal state.
★Green technology
The freon-free refrigerant and foaming insulation material are used for the fridge-freezer, causing no damage to the ozone
layer and having a very small impact on the global warming, so it is the environmentally friendly product.
★More user-friendly designs
Such functions as wide working voltage range, automatic temperature control, power-off memory, power-on delay,
automatic alarm, fast freezing, and fridge power-off, etc. are available.
Explosive views and parts list
Due to technological innovation, the descriptions of the product in this manual may not be completely consistent with your
refrigerator. Details are in accordance with the material item.
XI.

Preparations for use

Installationlocation
4.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
from rusting and leaking electricity.The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
5.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm of free space should be spared at
the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
No
Description
1
Light switch
2
Fridge shelves
3
Light
4
Crisper box
5
Crisper box cover
6
Freezer drawers
7
Door balcony
3
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fgc-78xa

Tabla de contenido