Preparations For Use - Infiniton CL-73H Manual De Instrucciones

Due to technological innovations, the product descriptions in this manual may not be completely consistent with your
refrigerator. Detailed information is in accordance with the final product.
X.

Preparations for use

Installation location:
Ventilation condition
1.
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing the refrigeration effect
while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator from
rusting and leaking electricity. The result of the total space of the room in which the refrigerator is installed being divided
by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
Heat dissipation space
2.
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm of free space should be spared at
the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm:
W D
710 770
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
H A
1855
1297
No Description
1
Glass shelves
2
Freezer drawer
3
4
.
3
B C(°) E
50
1407 130±5
Bottle racks
Butter box
F
100