Tips For Saving Energy; Operating Noises; Cleaning And Maintenance - Infiniton CL-189XY Manual De Usuario

TIPS FOR SAVING ENERGY

For the most energy efficient use of your appliance:
 Ensure your fridge freezer has adequate ventilation as recommended in the installation instructions.
 Allow warm food and drinks to cool down before placing in the appliance.
 Thaw frozen food in the refrigerator compartment and use the low temperature of the frozen food to cool refrigerated food.
 Keep door openings to a minimum.
 Open the appliance as briefly as possible.
 Ensure that the fridge and freezer doors are always closed properly.

OPERATING NOISES

Normal noises
 Motors are running.
 Refrigerant is flowing through the tubing.

CLEANING AND MAINTENANCE

Do not use abrasive cleaning agents or solvents.
1.Disconnect the mains plug from the mains socket.
2.Take out the food and store in a cool location.
3.Clean the appliance with a soft cloth, warm water and detergent.
4.Wipe the door seal with clear water only and then wipe dry thoroughly.
5.After cleaning reconnect and set the temperature as desired.
6.Put the food back into the appliance.
The LED light in the fridge compartment cannot be replaced by the user. If the
LED light stops working, please contact the local authorised service agent.
Cleaning Tips
• Remove all shelves, door shelves, vegetable containers, removable accessories (such
as egg tray and ice cube tray if included) and/or drawers from the appliance. Wash
them in warm soapy water with a soft sponge. Rinse and dry thoroughly.
• Wipe the interior parts (including door switch, temperature control knob and lamp
cover) with a damp cloth soaked in a mixture of warm water and dishwashing liquid.
For stubborn stains, use baking soda.
• Wipe down the doors, including edges, with a microfiber cloth dampened with a mild
dishwashing liquid and water. Use a wet sponge and soft brush (such as toothbrush)
to remove any stuck-on food.
Handle installation
Screw
Handle
Screw
1. Align the screw holes of the handle to
those on the side of the door.
2. Tighten the screws to fix the handle to the
door.
3. Assemble the screw
covers to the screws.
Screw cover
EN-13