Drawer Assembling
Grooves line up with each other and face inward.
K
6
4
6
J
L
4
x 2
6
6
5. Insert the Small Wood Dowels (4) into the inner holes of one Drawer Back Panel (J).
6. Align and attach the Drawer Back Panel (J) between the Drawer Side Panels (K and L) with four 30 mm
Screws (6).
7. Repeat the same procedure to attach the other Drawer Back Panel (J).
6
N
O
8. Attach the Caster Support (O) to the Lower Drawer Bottom Panel (N) with four 30 mm Screws (6).
7