Brightness; Language; Auto Clean Cycle; Freshwater Salt System (Optional) - HotSpring LIMELIGHT Serie Manual Del Propietário

To activate the Summer timer, simply follow these steps:
• Press the OPTIONS Hard button on the Control panel.
• Press the soft button next to Set up.
• Press the soft button next to
Summer timer to activate. The
Summer timer icon (on the Home
Screen) will display when activated.
IMPORTANT: If water temperature falls
below 80°F (26.7°C) the summer timer
will automatically be disabled.
• The Summer timer should be
deactivated when cooler temperatures return. To do this, simply repeat
last 3 steps. The yellow Summer timer icon will turn off.
SCREEN/LOGO LIGHT BRIGHTNESS
If you would like to change the brightness of the control panel screen:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-up.
• Press the soft button next to
Brightness to lower the screen
brightness from 7 down to 1.
IMPORTANT: Pressing the Brightness soft button at number 1 will
increase the screen brightness back to 7.
If you would like to change the brightness of the logo light:
• Press and hold the Brightness soft
button for 5 seconds until Set Logo
Light Brightness is visible.
• Press Brightness soft button to
change the logo light brightness
• Press BACK hard button (lower right)
to go back to screen brightness.

LANGUAGE

The Control panel screen can be viewed in seven different languages.
The languages are English, French, German, Dutch, Swedish, Norweign,
and Spanish. To change languages:
• Press the OPTIONS hard button on the
Control panel.
• Press the soft button next to Set-Up.
• Press the soft button next to More
• Press the soft button next to Language
until the desired language is visible.
IMPORTANT: Should you accidently change the language screen into a
language you don't know, simply repeat the previous steps where Set-up
is in the top right corner and Language is in the lower right corner.

AUTO CLEAN CYCLE

The Auto Clean Cycle will activate the jets for 10 minutes total time every
24 hours starting at the time ON was first pressed.
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-Up
• Press the soft button next to More
• Press the soft button next to Auto
Clean Cycle
Operating Instructions
English Spanish
VANISHING ACT CYCLE
The VANISHING ACT Cycle will activate the jets for 6 hours, ONLY to be
used with VANISHING ACT (see page 11)
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to Set-Up
• Press the soft button next to More
• Press the soft button next to VANISHING ACT
FRESHWATER SALT SYSTEM
If your spa has the FRESHWATER Salt
System installed you can navigate to the
screen as follows:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to
FRESHWATER Salt System.
(see FRESHWATER Salt System owner's manual for more information).
AUDIO (OPTIONAL BLUETOOTH
SYSTEM ONLY)
The following applies to spas that have a HOT SPRING wireless sound
system installed:
When the sound system has been installed in the spa you will be able
to pair any mobile Bluetooth device such as a phone or tablet to control
your music.
TO PAIR BLUETOOTH
NOTE: The spa must be powered on before pairing and playing music.
On your mobile device go to your Bluetooth settings and find My Spa
Music.
• Press My Spa Music to pair using the standard pairing method on
your mobile device.
• Enter the pairing code number 0000 to complete the pairing of your
mobile device with the spa.
IMPORTANT: You will be able to control all of the music functionality
from your mobile device.
Page 17
French
(OPTIONAL)