Mitsubishi Electric PZ-61DR-E Manual De Instalación página 9

8. Remote controller button functions
(3) RETURN button
(4) MENU button
(2) SELECT button
(1) ON/OFF button
Press to turn ON/OFF the Lossnay unit.
(2) SELECT button
Press to save the setting.
(3) RETURN button
Press to return to the previous screen.
(4) MENU button
Press to bring up the Main menu.
(5) Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on and
it will stay lit for a certain period of time depending on the screen.
(6) ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
(7) Function buttons
Use to select the Ventilation mode and fan speed on the Main display.
Use to select items on other screens.
Note: When the backlight is off, pressing any button turns the backlight on and
does not perform its function. (except for the ON/OFF button)
Button operations on the Main menu
Main
Cursor Timer
Weekly timer
Restriction
Filter information
Error information
Main display:
Cursor
F1
All manuals and user guides at all-guides.com
Main menu 1/2
Page
F2 F3 F4
(5) Backlit LCD
(7) Function buttons
F1, F2, F3, and F4 from the left
(6) ON/OFF lamp
(1) ON/OFF button
Pressing the MENU button will bring up the Main menu as
shown below.
(Refer to section 9.(2) "Main display" for details.)
1/2 Timer
2/2 Initial setting
*1 Refer to the Instructions Book for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes on the initial
setting screens, or 2 hours on the service screens (10
minutes on some screens), the screen will automatically
return to the Main display. Any settings that have not
been saved will be lost.
The available items on the menu depend on the connected
Lossnay unit model. For items not described in the manuals
that are enclosed with the remote controller, refer to the
manuals that came with the Lossnay units.
Page
Move the cursor to the desired function with the F1
and F2 buttons, and press the SELECT button to
go to the next page. Password may be required.
The function of the MENU, SELECT, and RETURN
buttons will appear on the setting screens.
Button function guide will appear at the bottom of
the screens.
- 9 -
Weekly timer
Restriction
Filter information
Error information
Service
*1
*1
*1
*1
*1
*2 *3
*2 *3