Zipper Maschinen ZI-WP700TN Instrucciones De Servicio página 26

13 TRANSPORT
For proper transport, follow the instructions and information on the transport packaging regarding
centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc.
Transport the machine in its packaging to the place of installation.
Transport of the assembled machine
The machine is equipped with two wheels, which allow easy transportation.
NOTICE:
Never transport the machine when it is loaded!
ZIPPER MASCHINEN GmbH
ZI-WP700TN
To manoeuvre the machine in the packaging, a pallet truck or a
forklift with appropriate lifting power can be used.
If you transport the machine with a vehicle, make sure that the
load is properly secured.
www.Zipper-Maschinen.at
1. Push the log carriage towards the motor until it
touches the limiting stopper.
2. Secure it with the locking plate (see picture be-
low).
3. Stand behind the unit and tip wheel axle for-
ward to transport it easily.
4. Lift the machine up and use your foot to pull
the axle towards your body so that the saw is
once again in the operation
5. For transport, position the rocker so that the
locking plate can be hooked clockwise onto the
cross strut – see picture on the left.
6. For easier transport the log saw is equipped with
two wheels.
TRANSPORT
position.
26