Parts And Components; Before Installation - cecotec BOLERO AGUAZERO 8000 FULL BUILT-IN Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Dishwasher
Fig. 1
1. Upper spray arm
2. Interior tube
3. Lower spray arm
4. Filtering set
5. Salt tank
6. Dispenser
Accessories
7. Cutlery tray
8. Upper basket
9. Cup rack (upper basket)
10. Lower basket
Tools
11. Screw (ST4*14, 10 units)
12. Screw (ST3.5x45, 4 units)
13. Screw (ST3.5x25, 2 units)
14. Plate (2 units)
15. Screw (ST3.5x16, 2 units)
16. Moisture barrier tape (1 unit)
17. Mounting bracket (2 units)
18. Plug (2 units)
19. Cover (2 units)
20. Velcro strip (2 units)
Note
*The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE INSTALLATION

- This product includes a safety package to protect it during transport. Unpack the appliance
and keep the original packaging and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In case the original packaging
is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If some are
72
missing or not in the best condition, contact the Technical Support Service of Cecotec
immediately.
Box contents
- Bolero Aguazero 8000 Full Built-in dishwasher
- Water supply hose
- Drain hose
- Instruction manual
- Moisture barrier tape
- Assembly kit
3. INSTALLATION
Step 1: Selecting the dishwasher location
Connecting the electric supply, the water supply and the drain
- When placing the machine, do it in an area in which dishes can be loaded and unloaded
easily. Do not place the dishwasher in an area in which room temperature is below 0°C.
- If you want to install the dishwasher in an existing cabinet, you must make sure there is
enough space to do so and that the wiring and plumbing are appropriate.
- Place the dishwasher near a tap, a water drain and a grounded electrical outlet. Remember
you should not modify the connections once the dishwasher is installed.
- You must leave at least 5 mm space between the upper part of the dishwasher and the
cabinet, and the exterior door must be aligned with the piece of furniture.
Follow the indications on image 2 on the dimensions the gap where you want to install
the dishwasher must have.
WARNING: the worktop under which you want to install the dishwasher must be stable
in order to avoid imbalances.
- If you want to install the dishwasher in the corner of a cabinet, you must make sure
there is enough space to open the door completely. Fig. 3
1. Dishwasher
2. Dishwasher door
3. Minimum space of 5 mm
4. Cabinet
Note
- Leave an appropriate distance around the machine to make its disconnection from the
mains and movement easier when cleaning it.
- Do not hold the device by its door or panel.
ENGLISH
73
AGUAZERO 8000 FULL BUILT-IN