Safety Instructions - cecotec BOLERO AGUAZERO 8000 FULL BUILT-IN Manual De Instrucciones

SAFETY INSTRUCTIONS

Icon Type
WARNING
RISK OF ELECTRIC SHOCK
FIRE
WARNING
IMPORTANT/NOTE
Please, keep this instruction manual in a safe place for future
reference or new users.
- Read these instructions carefully before assembling or
using the product. These instructions contain important
information that will help you get the best out of your
equipment. It is your responsibility to make sure every user
is informed about the warnings and precautions stated in
this instruction manual.
- This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved. Children must not play with the appliance.
Cleaning and user maintenance should not be carried out by
unsupervised children.
- After using the dishwasher, there may be remains in the
interior. Keep children away from the machine when it is
open.
8
Meaning
Risk of serious injury or death
Risk of dangerous voltage
Warning: risk of fire/flammable
materials
Risk of injury or damage to property
Correct system use
- WARNING: check if the dishwasher and package are not
damaged. Never use the dishwasher if it is damaged,
immediately contact the Cecotec Technical Support
Service.
- Packaging material may be dangerous to children.
Remove it and place it out of their reach.
- Choose a suitable and safe place to install the dishwasher.
- Do not install the dishwasher on a surface in which the base
cannot air properly, like a carpet.
- Use the provided hoses, do not reuse old hoses.
- Do not plug the dishwasher before installing it. The
machine must be unplugged during its installation.
- It is recommended that the dishwasher is installed by
authorised personnel.
- Never use an extension cord or a multi-socket
connection.
- The socket must be accessible after the dishwasher
installation.
- After the installation, the first time you run the dishwasher,
do it while it is empty.
- If the power cord is damaged, it must be replaced by
the Technical Support Service of Cecotec or similar
qualified personnel to avoid risks.
- Always use the socket provided with the dishwasher.
Do not modify the socket provided with the device if it
does not match the power socket.
- Check the power cord regularly for visible damage.
If the cord is damaged, it must be replaced by the
official Technical Support Service of Cecotec in order
to avoid any type of danger.
- Do not operate the product if its cord, plug or structure
show visible damage, do not operate properly or have been
dropped.
9
AGUAZERO 8000 FULL BUILT-IN