Care & Cleaning - Sage The Puck Sucker SEA503 Guía Rápida

HOW TO CLEAN THE CONTAINER
1. Separate the Puck Sucker™ lid from the
container and dispose the coffee pucks into the
bin. The easiest way to remove the vessel is by
popping the top out with your thumbs on each
side of the lid.
2. Once the container is completely empty, wash
the container with warm soapy water and rinse
thoroughly.
FILENAME: BEA503_PuckSucker QS Guide_E22
Application: Illustrator CC
Job Number: 203-05
Design: KC. Artwork: PR. Checked:
3. Using soft dry cloth, wipe the inside and the
outside of the container thoroughly.
NOTE
The container is dishwasher safe (top rack only).
8
Care & Cleaning
TBC
HOW TO CLEAN THE
PUCK SUCKER™ LID
Use a damp cloth to wipe any coffee residues off
the lid and dry thoroughly.
WARNING
• DO NOT wash the Puck Sucker™ lid under
running water or clean by rinsing.
• DO NOT submerge the Puck Sucker™ lid in
water or any other liquid.
• Keep the *inlet and *outlet port area clean and
free from any coffee grounds or any particles to
maintain good quality suction.
*refer to Components section
USED BATTERIES
• Exhausted batteries are to be removed from the
appliance and safely disposed of.
• Refer to the safety section of this manual
for cautions and warnings on handling and
disposing of batteries.
NOTE
Depending on the daily usage, the battery life
should be a minimum of 12 months.