Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
11
6
13
A
7
15
B
7
INSTALLING THE HOPPER SIDE HANDLE
PARTS REQUIRED:
1
x
Hopper Side Handle (#11)
INSTALLATION:
•
Remove the two pre-installed screws, locking washers, and washers from the
Hopper Side Handle pins (on the hopper itself).
•
Next, place the Hopper Side Handle over the positioning pins. Take one screw,
add a locking washer and a washer, then hand-tighten the screw (from below
the pin) into the Hopper Side Handle.
NOTE: DO NOT OVER-TIGHTEN THE SCREWS.
•
Repeat the same installation for the other end of the Hopper Side Handle.
INSTALLING THE LID HANDLE
PARTS REQUIRED:
14
2
x
Lid Handle Washer (#12)
2
x
Lid Handle Bezel (#13)
1
x
Lid Handle (#14)
12
INSTALLATION:
•
Remove the two pre-installed screws, locking washers, and washers from the
Lid Handle.
•
Take one screw, add a locking washer and a washer, then from inside the Main
Barrel lid, protrude the screw to the outside. Add a waster and a bezel on the
screw, then hand-tighten the screw (from the inside) into the Lid Handle.
NOTE: DO NOT OVER-TIGHTEN THE SCREWS.
•
Repeat the same installation for the other end of the Lid Handle.
INSTALLING THE FRONT SHELF
PARTS REQUIRED:
1
x
Front Shelf (#15)
INSTALLATION:
•
First, remove the two pre-installed screws from the front skirt of the Main
Barrel.
•
Insert the mounting brackets of the Front Shelf into the mounting holes on the
front skirt of the grill. Secure the support brackets of the Front Shelf using the
two screws previously removed. Note illustration 7A.
•
To lower the Front Shelf, press-in the two tabs (on the underside) to release
the lock, then allow the Front Shelf to lower towards the front skirt. Note
illustration 7B.
NOTE: WHEN INSTALLED CORRECTLY, THE FRONT SHELF CAN BE RAISED
(FOR USE) AND LOWERED (FOR STORAGE) WITH EASE.
www.louisiana-grills.com
5
Publicidad
Tabla de contenido
