Technical Specifications - cecotec bolero SQUAD I 3000 Manual De Instrucciones

Heating stops suddenly
during operation and the
display shows a flashing
'u'.
When trying to heat
areas of the same size,
like areas 1 and 2, the
display shows 'u'.
The fan motor produces
unusual noises.
Note
These instructions are intended for qualified technicians, do not attempt to carry them
-
out if you do not have the necessary training and knowledge, as any damage caused by an
incorrect repair will void the warranty.
Do not try to disassemble the unit on your own to avoid hazards and damages to the
-
induction hob.

7. TECHNICAL SPECIFICATIONS

Product reference: 02502
Product: Bolero Squad I 3000 hob
Cooking areas: 3 areas
Supply voltage: 220-240 V~ 50/ 60 Hz
The cookware is not
suitable.
The cookware
diameter is too
small.
The hob has
overheated.
The power supply
board and the board
connected to the
display malfunction.
The display board on
the communication
unit is damaged.
The main board is
damaged.
The motor fan is
damaged.
Use a suitable
cookware.
The unit has
overheated. Wait for
the hob temperature
to return to normal.
Press the On/off
button to restart the
product.
Check the
connections.
Substitute the
display board.
Substitute the power
supply board.
Substitute the fan.
BOLERO SQUAD I 3000
ENGLISH
The cookware
detection
circuit is
damaged,
replace the
power supply
board.
73