Maxxus SpeedBike SX3 Instrucciones De Instalación Y Funcionamiento página 40

Assembly
Step 1: Mounting the Front Stand
Attach the front stand (5) with two Allen screws M10x60 (A1), two spring washers M10 (A3) and two washers
Ø10 (13) to the front mount ofn the base frame (1).
Then fix the rear standpipe (6) also with two hexagon socket screws M10x60
(A1), two spring washers M10 (A3) and two washers Ø10 (13) to the rear mount of the base frame (1).
Then also fix the rear stand (6) with two Allen screws M10x60 (A1), two spring washers M10 (A3) and two wash-
ers Ø10 (13) to the rear mount
of the base frame (1).
5
1
ENG
Step 2: Assembly of the Handlebar Tube:
Connect the cable protruding out of the handlebars (8) with the cable protruding out of the base frame (1). Place
handlebar tube (8) into the base frame (1). Make sure you have the handlebars the right way around.
8
1
7