Maxxus SpeedBike SX3 Instrucciones De Instalación Y Funcionamiento página 53

Cockpit
Your cockpit is equipped with a Bluetooth receiver.
This supports the BLE connection standard and therefore enables the use of the Zwift APP.
Step 1:
Download the Zwift APP from the Google Play Store (Android) or the Apple Store (iOS).
Please note that the use of the Zwift APP may incur costs.
For more information, please refer to the information in the respective APP store.
Step 2:
Register with Zwift. This is normally carried out by e-mail as Zwift does not currently support registration via
Facebook or Google.
Step 3:
To connect to your training device switch on the cockpit.
The Bluetooth symbol appears at the edge of the upper part of the display.
Connect Zwift to your training device.
The following instructions were created on an Apple iPad. The procedure may differ for other devices.
Step 3.1: Select the user (USER)
Step 3.2: After you have selected the user (USER), Zwift will prompt you to select the device type.
Select "POWER SOURCE" here.
Step 3.3: A selection of Bluetooth compatible devices will appear. Please select your training device.
Step 3.4: As soon as the connection is established, the following display appears.
You can now start training
Please note that MAXXUS Group GmbH & Co. KG is not the producer or provider of the Zwift APP.
If you have any questions or problems with the APP, please contact Zwift directly.
You can find out more information and application videos at www.zwift.com.
20