Pentair Fleck 5800 XTRi Guia Del Usuario página 10

User Guide Fleck 5800-XTRi-XTR-SXT-LXT
Current day of the week
Note:
Determine the day of regeneration (1 for Monday, 2 for Tuesday, 3 for Wednesday,
4 for Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday).
J
Adjust the day of the week with
K
Press to validate the selection.
4.2.2. Diagnostic mode
To access the recorded informations, press
exit the diagnostic mode.
4.3. LXT controller
Note:
The controller must be plugged to be programmed.
After 5 minutes without any button pressed, the unit returns to normal operation without saving.
4.3.1. Basic programming
Note:
Menus are displayed by pressing MODE.
Time of day
Note:
Determine the time of day.
A
Press MODE until display position point to the Time of Day icon.
B
Press and hold
C
Set the time with
D
Press to validate the selection and return to the service mode.
Regeneration time
Note:
Determine the time of regeneration.
A
Press MODE until display position point to the Time of Regeneration icon.
B
Press and hold
C
Set the time with
D
Press MODE to go to the next parameter, or press
return to the service mode.
Water Hardness or number of days between regenerations
Note:
Determine the water hardness in mgl (metered) or the number of days between regenerations (time clock).
A
Press MODE until display position point to the Hardness or Days between
regenerations icon.
B
Press and hold
C
Set the water hardness or the number of days between regenerations with
.
D
Press MODE to go to the next parameter, or press
return to the service mode.
10 / 76
and .
a
nd
or until the Programming icon appears.
or .
or until the Programming icon appears.
or .
or until the Programming icon appears.
simultaneously for 5 seconds. Press
to validate the selection and
to validate the selection and
to see the next data. Press
or
Ref. MKT-UG-054 / A - 03.06.2022
to