Mode Menu - Uline H-9884 Manual

MODE MENU

NOTE: This sub-menu activates modes so they
will be available for use with the MODE button.
Weigh mode is always active.
• Parts Count [COUNT] (on, off) – Set to "ON" for the
mode to be active.
• Check Weigh [Check] (on, off) – Set to "ON" for the
mode to be active.
UNITS MENU
NOTE: This sub-menu activates units so they will
be accessible with the UNITS button. The units
in the menu must be turned on to be active.
NOTE: Available units and modes vary by
model and local regulations.
WARNING! Electric shock hazard. Disconnect
the equipment from the power supply before
cleaning.
ATTENTION! Do not use solvents, harsh
chemicals, ammonia or abrasive cleaning
agents.
PAGE 5 OF 24
SETTINGS CONTINUED
SECURITY SWITCH
• Menu Lock switch may be used to limit changes to
the user menu. (See Figure 4)
Figure 4
• The switch may set some scale settings as required
by the approval agency.
• The switch may be secured using paper seals, wire
seals or plastic ties.
MAINTENANCE
• Clean the main housing with a damp cloth and mild
detergent, if necessary.
Unlocked
Locked
0422 IH-9884