Maintenance After Each Use - T.I.P. Cross Tools CKS 1200 V Traducción De Las Instrucciones De Uso Originales

Translation of original operating instructions
Maintenance work
Fuel filter
Air filter
Spark plug
Silencer
Complete machine
Chain catcher
Claw cover
Safety label
WARNING: Before cleaning, the inspecting or repairing the unit, make sure that en-
gine has stopped and is cool. Disconnect the spark plug to prevent accidental
starting.
9.1.

Maintenance after each use

1. Air filter
NOTE: When installing the main filter, make sure that the grooves on the filter edge are
correctly fit with the projections on the cylinder cover.
2. Oiling port
(1) Oiling port
Before
each use
Clean
Replace
Clean
Replace
Check
Replace
Clean
Replace
Check
Clean
Check
Replace
Check
Replace
Replace
Release the button and remove the air filter cover.
Take of the filter element and brush off attached
sawdust. When the filter is clogged with dust. sepa-
rate it in halves and shake-wash with gasoline.
When using compressed air, blow from the inside. To
assemble the cleaner halves, press the rim until it
clicks.
Dismount the guide bar and check the oiling port for
clogging.
Operating hours
After
each use
10 20
X
X
X
X
X
X
17
If required/
yearly
damaged
100
X
X
X
X
X X X
X
X
X
X
For de-
commis-
sioning
X
X
X
X
X
X
X
41