Ryobi RY40509 Manual Del Operador página 29

Each week of use:
 Reverse the guide bar on the saw to distribute
the wear.
 Lubricate the socket at the end of the guide bar
using a grease syringe in the lubricating hole.
 Turn the guide bar and check that the lubrication
holes and chain groove are free from impurities.
A bar with any of the following faults should be
replaced immediately:
 Wear inside the bar rails that permits the chain
to lay over sideways
 Bent guide bar
 Cracked or broken rails
 Spread rails
TRANSPORTING AND STORING
See Figure 39.
WARNING:
Always remove the battery pack before trans-
porting or storing chainsaw. Place battery pack
indoors in a dry, secure location out of the reach
of children when storing. Failure to follow these
instructions may lead to accidental starting or
unauthorized use and result in serious personal
injury.
MAINTENANCE
 Do not store or transport the chainsaw when it
is running. The chainsaw should always be idle
before storing or transporting.
 Always place the guide bar scabbard on the
bar and chain before storing or transporting the
chainsaw. Use caution to avoid the sharp teeth
of the chain.
 Clean the chainsaw thoroughly before storing.
Store the chainsaw indoors, in a dry place that
is locked and/or inaccessible to children.
 Keep away from corrosive agents such as gar-
den chemicals and de-icing salts.
29 - English
Fig. 39