Rear Panel - Ashdown Engineering INTERSTELLAR-600 Manual De Instrucciones

INTERSTELLAR-600
USER GUIDE

REAR PANEL

4-WAY FOOTSWITCH SOCKET - For the 4 way footswitch to operate it is
essential that the corresponding front panel push buttons be in the OUT
position. This is a mono jack socket for connection of the Ashdown 4 way
footswitch (sold separately) only. Always connect this prior to turning on the
power to the amplifier as the footswitch derives its power from the amplifier
and sends a serial data stream to the amplifier in order to operate the
various functions.
Each of the 4 facilities available for selection is indicated by an LED that will
light when that facility is selected from the footswitch.
N.B The amp features Compression & Sub Harmonics and can be turned on
using the footswitch, there are no controls on the front panel and the FX are
pre-set to Guy's preferred settings.
TAURUS INPUT - The rear panel has a Line Input socket tuned for
connecting to a Moog Taurus bass pedal. This can also be used for plugging
a CD, Tape or MP3 player into the amplifier for practising, rehearsing or for
connecting a second pre-amp into the system.