Using The Clock And Timers; Setting The Clock - Panasonic SC-AKX70 Instrucciones De Funcionamiento

Using the clock and timers

Setting the clock

This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
Each time you press the button:
CLOCK ]
2
Within 8 seconds or so
Press [R/T] to set the time.
3
Press [OK] to fi nish setting the time.
Displaying the clock
Press [CLOCK/TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer
You can set the timer to come on at a certain time to wake you
up (play timer) or to record from the radio or the other optional
equipments (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Play timer Prepare the music source you want to listen to;
disc, USB device, internal memory, radio or other
optional equipments and set the volume.
Record Insert the USB device (for USB recording) and tune
timer to the radio station (Z page 22) or select the music
port or AUX source (Z page 16).
1
Press [CLOCK/TIMER] repeatedly to select the timer
function.
CLOCK
# PLAY : to set the play timer
# REC : to set the record timer
(Proceed to the next step within 8 seconds)
2
Press [R/T] to set the starting time.
Play timer indicator
Panasonic Corporation
Web Site: http://panasonic.net
AKX70_PN_LE_EN.indd 24 AKX70_PN_LE_EN.indd 24
# PLAY ] # REC
Original display
# PLAY ] # REC
]
Original display
Start time
Record timer indicator
3
Press [OK] to confi rm.
4
Repeat steps 2 and 3 to set the fi nishing time.
Finish time
5
Press [R/T] to select the desired source for play timer or
record timer.
6
Press [OK] to confi rm.
For play timer proceed to step 9.
For record timer continue from step 7 onward.
7
Press [R/T] to select the desired recording storage
location.
8
Press [OK] to confi rm.
To activate the timer
9
Press [# PLAY/REC] repeatedly to turn on your desired
timer.
# PLAY
No display (off)
10
Press [`] to turn off the unit.
The unit must be turned off for the timer to operate.
Change the Repeat steps 1 to 8 and 10 (Z see left and
settings above).
Change the 1) Press [# PLAY/REC] to clear the timer
indicator from the display.
volume
2) Make changes to the volume.
3) Perform steps 9 and 10.
Check the Press [CLOCK/TIMER] repeatedly to select
settings # PLAY or # REC.
Cancel
Press [# PLAY/REC] to clear the timer
indicator from the display.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
# REC
Sp En
RQTX1092-1M
L0210CH1030
3/9/2010 9:05:34 AM 3/9/2010 9:05:34 AM