System; Status - Devolo MAGIC WiFi next Manual

currently assigned network data are visible (greyed
out).
If a DHCP server is already present on the network
for assigning IP addresses (e.g. your Internet rou-
ter), you should leave the Retrieve network set-
tings from a DHCP server option enabled so that
the devolo Magic adapter automatically receives
an address from it.
If you want to assign a static IP address, make
entries accordingly for the Address, Subnet mask,
Default gateway and DNS server fields.
Confirm your settings by clicking the Disk icon.
Then, restart the devolo Magic adapter (see Chap-
ter 4.7.3 Configuration) to ensure that your chan-
ges take effect.
IPv6 configuration
If you want automatic IP address assignment and
there is already a DHCP server present on the net-
work for assigning IP addresses (e.g. your Internet
router), enable the Retrieve network settings
from a DHCP server option to ensure that the
devolo Magic adapter automatically receives an
address from it.
Network configuration 46
If you want to assign a static IP address, make
entries accordingly for the Address, Subnet mask,
Default gateway and DNS server fields.
Confirm your settings by clicking the Disk icon.

4.7 System

In the System area, you can configure the settings
for security and other devolo Magic adapter device
functions.

4.7.1 Status

Here you can view the most important information
on the devolo Magic adapter, including the current
date and time, time zone, MAC address of the
devolo Magic 2 WiFi next