Devolo MAGIC WiFi next Manual página 107

In Power Management, you can enable Power-
save mode and Standby
devolo Magic adapter.
If Powersave mode has been enabled, the
devolo Magic adapter switches to PowerSave
mode automatically whenever reduced data trans-
mission over ethernet is detected.
The latency (time for transmitting a data
packet) may be negatively affected.
If Standby mode is enabled, the devolo Magic
adapter automatically switches to Standby mode if
no ethernet connection has been enabled, i.e. if no
network device (e.g. computer) is switched on and
connected to the network interface and if Wi-Fi is
disabled.
In this mode, the devolo Magic adapter is not
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed over the electrical
wiring again.
Powersave mode is disabled in the devolo Magic
adapter factory default settings.
Standby mode is enabled in the devolo Magic
mode on the adapter factory default condition.
The LED settings let you disable the LED status dis-
play of the Wi-Fi and Powerline LEDs.
An error status is indicated by corresponding flas-
hing behaviour regardless of this setting.
You can completely disable the operating but-
tons on the devolo Magic adapter in order to pro-
tect yourself against possible changes. Simply
disable the Enable PLC button or Enable Wi-Fi
button option.
The operating buttons are enabled in the
devolo Magic adapter factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
coupled with a radio clock. Select your time zone
and time server; the devolo Magic adapter auto-
Network configuration 48
For information on the LED behaviour of the
devolo Magic adapter in standby mode, re-
fer to Chapter 2.3.1 Reading the PLC indi-
cator light/ 2.3.3 Reading the Wi-Fi
indicator light.
devolo Magic 2 WiFi next