Wi-Fi Networks - Devolo MAGIC WiFi next Manual

33 Network configuration

4.4.2Wi-Fi networks

You can make all necessary changes to your Wi-Fi
network here.
devolo Magic 2 WiFi next
Wi-Fi network mode
The devolo Magic adapter supports both the
parallel operation of the Wi-Fi frequency bands
and their separate use.
The Wi-Fi network mode field lets you define your
preferred setting by clicking the respective field:
b
2.4 GHz + 5 GHz – Both frequency bands are
used
b
2.4 GHz – Only the 2.4 GHz frequency band is
used
b
5 GHz – Only the 5 GHz frequency band is used
b
Off – If desired, you can completely switch off
the Wi-Fi section of your devolo Magic adapter
here.
Keep in mind that after saving this setting, you
will be disconnected from any existing wireless
connection to the devolo Magic adapter. In this
case, configure the device over Ethernet.
Network name
The network name (SSID) determines the name of
your wireless network. You can see this name
when logging onto the Wi-Fi, allowing you to
identify the correct Wi-Fi network.