Configuration; Firmware - Devolo MAGIC WiFi next Manual

49 Network configuration
matically switches between standard time and
summer time.

4.7.3Configuration

Saving the device configuration
To save the enabled configuration to your compu-
ter as a file, select the corresponding button in the
System
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic adapter in the System
tion area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The devolo Magic adapter is reset to the original
factory defaults in the System
area with the Factory Reset option.
Doing so causes you to lose your personal
Wi-Fi and PLC settings. The last-assigned
passwords for the devolo Magic adapter
are also reset.
devolo Magic 2 WiFi next
 
Configuration Save Configuration

For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and reloaded into the devolo Magic
adapter. This function can be useful for creating a
variety of configurations that will let you quickly
and easily set up the device for use in different net-
work environments.
Reboot device
In order to reboot the devolo Magic adapter, select
the Reboot button in the System
on area.

4.7.4 Firmware


Configura-
The firmware of the devolo Magic adapter inclu-
des the software for operating the device. If neces-
sary, devolo offers new versions on the Internet as
a file download, for example to modify existing
functions.
Current firmware
Configuration
The currently
devolo Magic adapter is displayed here.

Configurati-
installed firmware of the