Reading The Wi-Fi Indicator Light - Devolo MAGIC WiFi next Manual

19 Introduction
Connecting Wi-Fi devices via WPS
b
If the device is still on factory defaults, tap the
Wi-Fi button in order to activate WPS.
b
If the Wi-Fi connection was switched off and
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
b
If the Wi-Fi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
Wi-Fi-LED
1 White LED
2 White LED
devolo Magic 2 WiFi next
Flashing behavior Meaning
Flashes at intervals The devolo Magic adapter is in
of 0,1 sec. on / WPS mode to integrate Wi-Fi-
5 sec. off enabled devices via WPS.
Lights up steady Wi-Fi is switched on and active.
WPS is one of the encryption standards de-
veloped by the Wi-Fi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 Wi-Fi Pro-
tected Setup (WPS).

2.3.3 Reading the Wi-Fi indicator light

The integrated Wi-Fi indicator light (LED) shows
the status of the devolo Magic 2 WiFi by illumina-
ting and/or flashing
LED status display
(web interface*)
Cannot be disabled
Can be disabled