Things You Should Know; Description Of The Appliance; Scope Of Use - Stanley SXCMD15WE Manual De Instrucciones

THINGS YOU SHOULD KNOW

● To avoid overheating of the electric motor, this
compressor is designed for intermittent operation
as indicated on the technical dataplate (for example,
S3 25 % means 2.5 minutes ON, 7.5 minutes OFF). In the
case of overheating, the thermal cutout of the motor trips,
automatically cutting off the power when the temperature
is too high. The motor restarts automatically when normal
temperature conditions are restored.
● The compressor is equipped with double insulation, it
does not require an earth connection.
● When fitting a tool, the flow of air in output must be
switched off.
● When using compressed air, you must know and comply
with the safety precautions to be adopted for each type
of application (inflation, blowing, pneumatic tools, etc.).
● Check that the air consumption and the maximum work-
ing pressure of the pneumatic tool and of the connecting
hoses (with the compressor) to be used are compatible with
the pressure set on the pressure regulator (not included)
and with the quantity of air delivered by the compressor.
● The compressor's performance is guaranteed for
operation between 0 and 1000 meters above the sea level.

2. DESCRIPTION OF THE APPLIANCE

(Fig. 8)
1. Intake air filter
2. Power cord
3. Reel
4. Air hose
5. Quick coupling
6. Switch I/O (ON/OFF)
3. PACKAGING CONTENTS LIST
● Air compressor
● Assembly instruction sheet
● Rubber Spacers (4)
● Instruction manual and other documents

4. SCOPE OF USE

The compressor is designed for generating compressed
air for tools operated by compressed air.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent
purposes.
The machine is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user/
operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
21
G
B