DeWalt DW934 Manual De Instrucciones página 14

629182-00,DW934 7/10/06 4:17 PM
CAUTION: Do not use any cleaning fluids on the sight window
or the front window to avoid clouding them and compromising the
safe operation of the saw. Use compressed air to remove accumu-
lated dust from the inside of the sight and front windows. Wear
safety glasses when performing this.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC
outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or soft non-metallic brush. Do
not use water or any cleaning solutions.
Lubrication
Self lubricating ball and roller bearings are used in the tool and relu-
brication is not required. We recommend that you take or send the
tool to a certified service center for a thorough cleaning, inspection,
and lubrication of the gear case annually, depending on how much
you use the tool.
MAINTENANCE
Repairs
To assure product SAFETY and RELIABILITY, repairs, mainte-
nance and adjustments (including brush inspection and replace-
ment) should be performed by a D
D WALT authorized service center or other qualified service per-
E
sonnel. Always use identical replacement parts.
Accessories
Recommended accessories for use with your tool are available at
extra cost from you local service center. Use only 6-3/4" D
metal cutting blades with a 20mm arbor.
Recommended accessories for use with your tool are available at
extra cost from your local service center. If you need any assis-
tance in locating any accessory, please contact D
Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-
4-D WALT (1-800-433-9258) or visit our website www.dewalt.com.
E
All manuals and user guides at all-guides.com
Page 13
WALT factory service center, a
E
WALT
E
WALT Industrial
E
13
CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty mate-
E
rials or workmanship for three years from the date of purchase.
This warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call 1-800-4-D
433-9258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others.
This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D WALT tools are covered by our:
E
1 YEAR FREE SERVICE
D WALT will maintain the tool and replace worn parts caused by
E
normal use, for free, any time during the first year after purchase.
2 YEARS FREE SERVICE ON XRP ™ BATTERY PACKS
DC9096, DC9091 and DC9071
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D WALT Power Tool, Laser, or Nailer for any reason, you can
E
return it within 90 days from the date of purchase with a receipt for
a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country spe-
cific warranty information contained either in the packaging, call the
local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement.
WALT (1-800-
E
WALT for a free
E