Work Area; Electrical Safety - DeWalt DW934 Manual De Instrucciones

629182-00,DW934 7/10/06 4:17 PM
FIG. 1
B
A
C
J
K
A. Trigger switch
B. Switch lock off button
C. Depth adjustment
knob
D. Blade lock button
E. Kerf indicator
F Blade clamping
screw
All manuals and user guides at all-guides.com
Page 1
D
E
I
H
G
F
G. Lower guard
H. Lower guard
retracting lever
I. Battery pack
J. Sight window
K. Front window
1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D WALT TOOL, CALL US TOLL FREE AT:
E
1-800-4-D WALT (1-800-433-9258)
E
General Safety Rules – For All Battery
Operated Tools
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS

WORK AREA

• Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operat-
ing a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Do not abuse the cord. Never use the cord to carry the tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Replace damaged cords immediately. Damaged cords
may create a fire.
• A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified
charger for the battery. A charger that may be suitable for one
type of battery may create a risk of fire when used with another
battery.
• Use battery operated tool only with the specifically desig-
nated battery pack. Use of any other batteries may create a
risk of fire.