Publicidad
Step 26
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D87 and D88).
å
Fasten the EXTENSION SLIDES (40MC) to the DRAWER SIDES (D87 and D88). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (191K) to the DRAWER FRONT (G). Use two BLACK 7/8" MACHINE SCREWS (37S).
2
3
4
37S
BLACK 7/8" MACHINE SCREW
(2 used for the PULL)
www.sauder.com/service
Open end
1
191K
G
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
10A
D88
D87
3
4
3S
427030
7
Screw head - turn CAM
to line up holes in the
SLIDES with holes in
DRAWER SIDES
10A
Open end
1
2
Drawer Slide
Center the screw in the oval hole.
Page 31
Publicidad
